SPXO SG-3030JF SG-3030JF 32.768000 kHz B Product name Product Number / Ordering code Q3102JF020001xx Please refer to the 8.Packing information about xx (last 2 digits) Output waveform CMOS Complies with EU RoHS directive Reference weight Typ. 90 mg 1.Absolute maximum ratings Parameter Symbol Min. Typ. Max. Unit -0.3 -55 - 7 125 V C Min. Typ. Max. Unit Conditions / Remarks 1.5 1.5 -40 -18 -120 -2 45 VIO-0.4 80%Vcc -5 32.7680 50 - 5.5 5.5 85 28 10 2 2 55 GND+0.4 15 20%Vcc 200 200 1 5 kHz V Vcc Pin Vcc-GND T_stg Maximum supply voltage Storage temperature 2.Specifications(characteristics) Parameter Symbol Output frequency Supply voltage Interface power supply voltage Operating temperature Frequency tolerance Frequency temperature coefficient Frequency voltage coefficient Current consumption Symmetry Output voltage Output load condition Input voltage Rise time Fall time Start-up time Frequency aging 3.Timing chart f0 Vcc VIO T_use f_tol f0-Tc f0-Vcc Icc SYM VOH VOL L_CMOS VIH VIL tr tf t_str f_age tr tf VCC 80 %VCC 50 %VCC 20 %VCC GND tw t 1 Page Conditions / Remarks Vcc Pin Storage as single product VIO Pin C -6 x10 x10-6 x10-6 /V A % No condensation @+25, Vcc=3.3V , 5+/-23x10^-6 -20 to 70 (+25 is reference) @+25 Vcc=1.5V to 5.5V Vcc=3.3V No load condition 1/2Vcc(VIOLevel IOH=-400A IOL=400A pF CMOS Load - ns ns s x10 -6 20%VIO 80%VIO 15pF VIO=1.5V to 5.5V 20%VIO 80%VIO 15pF VIO=1.8V to 5.5V Vcc=2.0V to 5.5V @+25 Vcc=3.3V First year 4.Test circuit 1) Waveform observation swich VCC by-pass capacitor ST or OE supply Test Point GND OUT L_CMOS 2) Current consumption swich VCC A ST or OE by-pass capacitor supply GND OUT Test Point *Current consumption under the disable function should be = GND. 3) Condition (1) Oscilloscope * Band width should be minimum 5 times higher (wider) than measurement frequency. * Probe earth should be placed closely from test point and lead length should be as short as possible. * Recommendable to use miniature socket. (Don't use earth lead.) (2) L_CMOS also includes probe capacitance. (3) By-pass capacitor (0.01 mF to 0.1 mF) is placed closely between VCC and GND. (4) Use the current meter whose internal impedance value is small. (5) Power supply * Start up time (0 %VCC (R) 90 %VCC) of power source should be more than 150 ms. * Impedance of power supply should be as lowest as possible. 2 Page 5.External dimensions (Unit: mm) 6.Footprint(Recommended) 1.8 7.10.2 5.08 1.5 Max. #2 #1 0 Min. (0.75) 2.0 4.2 5.10.2 SG3030 B E 9245A 4.60.2 #3 #4 0.4 (Unit: mm) 5.08 (0.75) 7.Reflow profile Pre Heating Temperature Tp1 ~ Tp2 = + 170 C Heating Temperature TMlt = + 220 C Peek Temperature TMax. = + 260 C Point of measuring In case of Solder ability Terminal. In case of Resistance to soldering heat Surface. Temperature +260C TMax. +220C Tmlt Tp2 Tp1 35s 100s t(time) 8.Packing information [ 1 ]Product number last 2 digits code(xx) description The recommended code is "00" Q3102JF020001xx Code 01 11 12 Condition Any Q'ty vinyl bag(Tape cut) Any Q'ty / Reel 250pcs / Reel Code 13 00 Condition 500pcs / Reel 1000pcs / Reel 3 Page [ 2 ] Taping specification Subject to EIA-481 & IEC-60286 (1) Tape dimensions Material of the Carrier Tape : PS Material of the Top Tape : PET+PE A Unit: mm B E D Carrier tape Top tape F C Symbol A B C D E F Value 1.5 4 8 9.25 16 2.3 (2) Reel dimensions Center material : PS Material of the Reel : PS 4 Page 9.Notice * This material is subject to change without notice. * Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. * The information about applied data,circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of customer damage or infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. * When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. * You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. * These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / Traffic control equipment / And others requiring equivalent reliability. 10.Contact us http://www5.epsondevice.com/en/contact/ 5 Page